Carbon Fiber Recycled PE
3D Pellets
Density: 0.95 g/cm3
Tensile Strength: 25 MPA
Flexural Modulus 2700 MPA
Product Description
Xtellar carbon Fiber recycled PE pellets are an engineering-grade resin containing 90% recycled content sourced primarily from recycled bottle caps. This grade also contains recycled carbon fiber for added strength and durability. This environmentally friendly formulation retains the chemical, impact resistance, and lower density inherent to traditional polyethylene and polypropylene-based materials.
Print Settings
Preparation
Build Plate: Polypropylene sheet, approximately 0.5 inch thick.
First Layer Extrusion: 110%
​
Temp Profile
Zone 1 - 170 C
Final Zone - 200 - 205 C
Recoat Temp: 120 C
Recoat Times: approximately 2-3 min in 70 degree F environments
​
Other
Chamber temp: N/A
Bed Heating: N/A
​
Note: recoat temperatures less than 80 C can cause poor layer bonding and delamination.
Automotive
Rapid Prototyping, Custom Bespoke Designs, Interior and Exterior Components
Aerospace
Rapid Prototyping, Custom Bespoke Designs, Interior and Exterior Components
Marine
Lightweight, Watertight Parts, 3D Printed Boats, and Marine Accessories
Furniture
Indoor and Outdoor furniture Applications, Lightweight and Cold Weather Durability